"The All-Shield Clear Coating is a very useful and user friendly product. We use it in the production of our copper fountains and find it holds up well even where water is running over it. We have removed thick calcium deposits to find the clear coating underneath still protecting the metal. It is quick drying and easy to apply. Touch ups and recoating are not a problem like with other products."
Stu & April   -  Suma Art Fountain Sculptures

"Loved the way my roof turned out with your product. Will use it again when the time comes. The color of the copper look's like new, and I am so pleased. Look's great with the color of the brick. You made my day."

D. Shenigo    -   Another Satisfied Customer, Could You Be Next?

Jack,
“We make copper water sculpture, fountains and sprinklers, and for years have been looking for a durable, clear sealer. We tried all of the rattle cans offered, as well as brush or spray-on clear lacquers and sealers, and found all of them lacking. Many would not seal out the moisture. For a few days or weeks they would look fine, then moisture would show up under the sealer. Several of the sealers we tried were bad about being milky if not put on very lightly.
With the All-Shield sealer provided by Dever Enterprises we have had none of these problems. A person with little training is able to put it on and get professional looking results. The seal is tight, moisture stays out, and our product stays shiny and stays looking good.”
I have been very pleased with the All-Shield sealer and plan to keep using it."

Clayton Lewis – Levy Bay Inc.

“At first I was skeptical of all the things that were promised regarding the All-Shield products but after trying them and more importantly my customers trying them and coming back for more I am a true believer. We sell to a lot of boaters and they just love the metal cleaner and the All-Shield coating, because they don't have to come back and protect surfaces again. From brass to stainless to fiberglass it is the one product to have on board. Thanks Jack for turning us on to your great products.”

Todd Votaw - Sutton Industrial Hardware

“Clear coating non-ferrous metals (Brass, copper, and stainless steel) has always been a troubling issue in my sculpture business. In my continuous scouring of the internet for a better product for protecting my sculptures I recently came upon Dever's All-Shield. I was amazed at All-Shield’s aerosol clear coat product. I was able to put multiple coats on several of my large sculptures with one can. It dries so quickly that you don't have to worry about drips or runs and the fine spray allows for excellent coverage in otherwise hard to reach spots. The first solid copper outdoor pieces that I had coated are showing no sign of oxidation at all. This is a result that far surpasses any other product that I have tried including special polyurethane's, lacquers, and enamels. I was so impressed with all of Dever's products that I decided become a dealer so that all of my sculpture customers can enjoy the benefits of these quality products.”

Bruce Snyder - Copper Magic

"Jack, that stuff (All-Shield metal care products) is awesome! I have these older, copper salt and pepper shakers I am very fond of. They are very tall and long. They get very corroded and tarnished over time. The last time I cleaned them it took me two hours with a copper cleaner and a scrubber to get them clean. I used the liquid first and then the polish, and what a difference. It took me about fifteen minutes to clean them both."

Jim Salmon, professional home inspector and host of the Home Repair Clinic radio show.

“Thanks for introducing me to your products. I have a hot tub… and the wood got weathered and was starting to fade. Knowing the wood on the hot tub would continue to be exposed to the weather… I wanted to protect it from the elements. Your products have done the job. The wood looks better than new. They were easy to apply. If you need a reference for your products, don’t hesitate to use me. I had my own reservations about using your products, boy was I wrong.”

A. Arnold – Another Satisfied Customer, Could You Be Next?

“Just a note to let you know how very pleased we are with the products that you have been supplying to us. The combination of your prep and protection products is fantastic for silver plated items. It allows us to polish the items and then seal them directly over the polished surface. Because of the durability of your coating, the item then does not require any further polishing. This represents a tremendous cost savings to people that use silver items on a regular basis, as it virtually eliminates all of their maintenance. Thank you all of your technical support in getting us started with these excellent products.”

W. Snyder - Another Satisfied Customer, Could You Be Next?

“Just wanted to take a few moments to thank you for your product… which was applied within our plant. As you know, we have had a continuous problem with rust accumulation… the U. S. D. A. has also taken note of this problem. After trying numerous methods to remove the rust, all with out success… we applied your coating… the product completely enclosed the rust within a clear, hard as nails top coat. The preparation and application of your product was uncomplicated and time efficient. The U. S. D. A. approved our application of your coating and was quite pleased with its results. Your product allowed us to save both tame and money. Thanks again for your coating and know we plan to continue using your product in other problem areas within our plant.”

P. Stuart - Another Satisfied Customer, Could You Be Next?

“I purchased your product and much to my expectation and hopes, I am delighted with the results. Quite a few boaters have inquired as to what I have used, and I highly praise your product.”

S. Staffieri - Another Satisfied Customer, Could You Be Next?

“It has been four years since… I applied your coating to the hull of my 40’ Owens Cruiser. The product has done everything that you said it would. The hull looks brand new.”

A. McDonald - Another Satisfied Customer, Could You Be Next?

“I have never used anything that can match your products. My wood looks like I did it last week! I purposely left one step… untreated, it looks grey!”
L. Lefkowitz - Another Satisfied Customer, Could You Be Next?

“Just a note to tell you that I have been using your products for many years. It is the longest lasting and easy to use coating I have ever encountered. Besides that, it is a beautiful finish. I often get complimented by total strangers.”

A. Gotzes - Another Satisfied Customer, Could You Be Next?

“I think your products are remarkable and have seen nothing like them on the market!”

M. Molina - Another Satisfied Customer, Could You Be Next?

“Some time ago, I tried your products on several exposed and badly weathered areas on my boat. After doing a trial area… I saw how well your coating withstood the elements of our harsh weather. Now, after all this time of comments of how well my boat looks, withstanding the elements of the sun and salt spray, I am in the process of applying the coating to bring back the high gloss of my boats surfaces, which it is! In closing, I want to say that your coating is probably one of the best and most time saving products that I have found for my boat.”

C. Aroneck - Another Satisfied Customer, Could You Be Next?

“Because of your space age product my Poor Man’s Yacht is definitely years ahead in the future generation of coatings. Your space age clear coating gives a bullet proof finish against all the corrosive chemicals in the air or sea water. Our tropical heat and humidity can age a boat twice as fast than if it were up North. Because of your products, all of our bright work is a pleasure to keep bright and our white work now has the same easy maintenance qualities.”

R. Auerbach Jr. - Another Satisfied Customer, Could You Be Next?

“You are to be commended on a remarkable product. I applied your coating to my newly purchased 25’ Sea Ray boat. Even after a few years of exposure to the sun, ocean and numerous excursions, the color did not fade! Because of my satisfaction with your product and its quality, I would be more than happy to endorse your product, and, of course, recommend it to any friends.”

B. Stallings - Another Satisfied Customer, Could You Be Next?