All-Shield® Oil-Out is a revolutionary “organic” cleaning product, which penetrates and breaks down most forms of oils, greases, curing compounds, sealers, mastics and graffiti. All-Shield® Oil-Out will virtually wick oil and grease from concrete, as well as remove old cures and mastics in preparation for a variety of coatings. All-Shield® Oil-Out is safe to use, biodegradable, non-flammable, non caustic and has no harsh odor. All-Shield® Oil-Out may be applied to a variety of surfaces such as concrete, brick, block, paving tiles, masonry and natural stone.

All-Shield® Oil-Out is available in five gallon containers, larger sizes are also available.

Application is simple, mix thoroughly before each use. Do not over agitate or use high speed mixing equipment. Product can be diluted with water as required for various applications. Slightly moisten area to be cleaned with clean water, do not saturate.

Pour All-Shield® Oil-Out liberally on stained areas. Scrub solution lightly with a steel or stiff bristle brush. Allow product to penetrate for 5 to 10 minutes. Clean area thoroughly with available water pressure. It is designed to wick oil to the surface, so if oil reappears, it is due to the cleaner drawing the oils to the surface. If this should happen, simply repeat the steps until the oil is completely removed. Protect product from freezing, shelf life is approximately two years in original, un opened container.

NOTE: It is recommended that you wear protective gloves and safety glasses when applying any chemicals(s).